Duofilm Dr. Yglo Skin Tag Treatment 50ml

Duofilm Skin Tag Treatment

Always read the label. Use only as directed.

1. Apply the disposable foam discs with the adhesive side
to the skin with the hole directly over the skin tag.
2. Apply the actuator on the aerosol can, with the metal
tip facing up and align the markings. Do not push down
on the actuator until ready to cool.
3. Place the aerosol can on a hard surface and push
down on the white actuator for 5 seconds. Then allow
the can to rest for 5 seconds. Be careful to avoid
contact with the metal tip when pressing down. (Do not
press for longer than directed and wait at least 5
minutes before reactivating.)
4. Remove the actuator from the aerosol can, with the
metal tip facing up.
5. Apply the metal tip on the skin tag for 40 seconds. Make
sure the metal tip covers as much of the skin tag as
possible. After application remove the foam disc and
dispose of it. Do not re-use.
6. Wash hands immediately after use.
7. When used by more than one person and/or after each
application, clean the actuator with alcohol on a small
piece of cloth.

50ml (at date of manufacture) of the compressed liquid gas Dimethyl ether (DME)

This product has a purchase limit of 0. If the limit is 0, there is no restriction on the quantity you can purchase.